6-Appendix A: Accessories and 57
Power Conservation
To conserve battery power, the camera’s Display backlight
shuts off automatically when there is no button activity for 60
seconds. If the camera is in Preview mode, it switches to
Playback mode. To turn on the Display backlight and activate
the camera, press any button.
If no buttons are pressed for 5 minutes, the camera turns off
(unless it is connected to a computer).
You can also turn off the Display backlight manually by
pressing and holding the button for at least 2 seconds. To
turn on the Display backlight again, press the button for at
least 2 seconds.
NOTE Power conservation only occurs when the camera is
running from battery power.
To Next Page
Loading...
Need help?
General
