HP Photosmart 2570

6 • HP All-in-One
15
A: USB Connection - Do not connect yet.
B: Ethernet (Wired) Network
Use this connection type if you want to connect the
device directly to one computer. (Do not connect until
the software instructs you to.)
Equipment needed: USB cable.
For a USB connection, go to Section A (page 7) for
instructions.
Use this connection type if you want an Ethernet
cable connection between the device and your
network.
Equipment needed: hub/router/switch and Ethernet
cable.
For an Ethernet cable connection, go to Section B
(page 9) for instructions.
Questions: For information on how to set up a
network, go to www.hp.com/support , enter
Photosmart 2570 , and search for Network Setup .
Choose ONE connection type (A or B)