To Next PageTo Next Page
Need help?Do you have a question about the HP Photosmart C6380 and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Print Speed Color | Up to 31 ppm |
| Duplex Printing | Automatic (standard) |
| Standard Memory | 64 MB |
| Scanner Type | Flatbed |
| Bit Depth | 48-bit |
| Maximum Copies | Up to 50 copies |
| Paper Handling Input | 125-sheet input tray, 20-sheet photo tray |
| Paper Handling Output | 50-sheet output tray |
| Media Types | Paper (plain, inkjet, photo), envelopes, transparencies, labels, cards, HP premium media, iron-on transfers, borderless media |
| Functions | Print, copy, scan, photo |
| Print Resolution Black | Up to 1200 x 1200 rendered dpi |
| Print Resolution Color | Up to 9600 x 2400 optimized dpi color |
| Recommended Monthly Page Volume | 250 to 500 pages |
| Number of Print Cartridges | 5 (1 black, 1 cyan, 1 magenta, 1 yellow, 1 photo black) |
| Scan Resolution | Up to 4800 dpi |
| Scan Size Flatbed (Maximum) | 8.5 x 11.7 in |
| Copy Resolution | Up to 600 dpi |
| Media Sizes Supported | Letter, legal, 4 x 6 in, 5 x 7 in, 8 x 10 in |
| Connectivity | 1 USB 2.0, 1 Ethernet, 1 PictBridge |
| Display | 2.4-inch color LCD |
| Operating Systems Supported | Windows XP, Windows Vista |
| Print Resolution | Up to 9600 x 2400 optimized dpi (when printing from a computer on selected HP photo papers and 1200 input dpi) |
Do not connect the USB cable until prompted; follow wired and wireless setup instructions.
Check the box contents against the list; contents may vary.
Remove all tape from the device and protective film from the display.
Open the device and clear all internal packaging materials.
Connect the power cord and adapter to the device and power source.
Press the power button to turn on the HP All-in-One.
If prompted, select your language and country/region.
Open the ink cartridge access door and raise the gray latch.
Remove printhead, avoid touching contacts, and prevent scratching.
Hold printhead upright, align blocks, and lower into device.
Slowly lower the latch to secure the installed printhead.
Remove plastic wrap by pulling the orange tab and twist off the cap.
Turn, slide, and press ink cartridges into their slots until they click.
Close the ink cartridge access door to begin the initialization.
Lift the output tray and slide the paper-width guide to the left.
Insert plain white paper into the main tray and adjust paper guides.
Lower the output tray after loading paper.
Lift the photo tray lid to access the photo paper slot.
Load photo paper glossy side down and adjust guides.
Lower the photo tray lid after loading photo paper.
Lift up the paper catch to receive printed output.
Press OK after loading paper to print the alignment page.
Press OK after the alignment page prints to complete the process.
Select one connection type: USB, Ethernet, or Wireless (802.11).
Follow instructions for connecting the HP All-in-One directly to one computer via USB.
Follow instructions for connecting the HP All-in-One to your network via Ethernet.
Follow instructions for connecting the HP All-in-One wirelessly to your network.
Turn on PC, insert CD, follow prompts, connect USB when prompted.
Connect USB cable, insert CD, double-click HP Photosmart CD icon, run Installer.
Connect Ethernet cable from device to router, then install software.
Locate and write down wireless router Network Name (SSID) and WEP/WPA passphrase.
Press Setup, navigate to Network, then select Wireless Setup Wizard.
Select your network name or enter it manually using the visual keyboard.
If required, use the visual keyboard to enter the WEP key or WPA passphrase.
Follow prompts to complete the network setup and install software.
Install software on Windows, selecting 'through the network' connection type.
Install software on Mac, following prompts and completing Setup Assistant.
Allow HP software access and temporarily disable anti-virus/spyware if needed.
Install software on additional computers, choosing correct network connection types.
Check network name, signal strength, interference, and power cycle router.
Ensure connection, run Wireless Setup Wizard, or disable security software.
Re-enter WEP/WPA keys carefully, checking for case sensitivity and spaces.
Load photo paper into the photo tray.
Insert camera memory card into the appropriate slot.
Navigate the Photo menu, select, and view desired photos.
Display photo options, preview the selected photo, and print it.
