Set the date and time
1.
Use
to adjust the
highlighted value.
2.
Use
to move to the
other selections and
repeat Step 1 until the
date and time are set
correctly.
3.
Press
when the date, time, and format
settings are correct, then press
again to
confirm.
Install and format an optional
memory card
1. Turn off the
camera and open
the Battery/
Memory card door.
2. Insert the optional
memory card in the
smaller slot as
shown. Make sure the memory card snaps into
place.
3. Close the Battery/Memory card door and turn on
the camera.
Always format memory cards before first use.
1.
With the camera turned on, press
until
appears in the upper right corner of the Image
display.
2.
Press
.
Setting up your camera 11
English
To Next Page
Loading...
