HP Prime - Page 66

62 Exam Mode
Modifying the default configuration
A configuration named Default Exam appears when
you first access the
Exam Mode screen. This
configuration has no functions disabled. If only one
configuration is needed, you can simply modify the
default exam configuration. If you envisage the need for a
number of configurations—different ones for different
examinations, for example—modify the default
configuration so that it matches the settings you will most
often need, and then create other configurations for the
settings you will need less often. There are two ways to
access the screen for configuring and activating exam
mode:
• press
O + A + c
• choose the third page of the Home Settings screen.
The procedure below illustrates the second method.
1. P r e s s
SH. The Home Settings screen appears.
2. Tap .
3. Tap .
The
Exam Mode
screen appears. You
use this screen to
activate a particular
configuration (just
before an
examination begins,
for example).
4. Tap . The
Exam Mode
Configuration
screen appears.
5. Select those features
you want disabled,
and make sure that
those features you
don’t want disabled are not selected.