HP Pro 3000 - Page 13

Storage MT: 90% relative humidity (Rh), 60°C for
12 hours, non-condensing
SFF: 90% relative humidity (Rh), 60°C for
12 hours, non-condensing
Altitude Operating MT: 0 to 10,000 feet (0 to 3048 meters) - This
value may be limited by the type and number of
options installed.
SFF: 0 to 10,000 feet (0 to 3048 meters) - This
value may be limited by the type and number of
options installed. Maximum allowable altitude
change rate is 1,000 ft/min (304.8 m/min).
Non-Operating MT: 0 to 30,000 feet (0 to 9,144 meters)
SFF: 0 to 30,000 feet (0 to 9,144 meters) -
Maximum allowable altitude change rate is 1200
ft/min (365.76 m/min).
Shock Listed are the levels of shock the product can withstand with No damage
being incurred. The values represent peak input acceleration during an 2~3 ms
half-sine shock pulse, 11 ms trapezoidal shock pulse.
Non-Operating MT:
35G's (Half-sine Shock)
30G's (Trapezoidal Shock)
SFF:
35G's (Half-sine Shock)
45G's (Trapezoidal Shock)
Vibration Listed are the levels of vibration the product can withstand with No damage
being incurred. The values represent a flat random vibration input
acceleration profile across the given frequency range.
Operating MT: Random vibration at 5Hz@0.00025G
2
/Hz,
10Hz@0.01G
2
/Hz, 100Hz@0.01G
2
/Hz,
300Hz@0.00001G
2
/Hz
5Hz to 300Hz, (0.25G's nominal).
SFF: Random vibration at 5Hz@0.00025G
2
/Hz,
10Hz@0.01G
2
/Hz, 100Hz@0.01G
2
/Hz,
300Hz@0.00001G2/Hz
5Hz to 300Hz, (0.25G's nominal).
Non-Operating MT: ~2.09Grms (5-500Hz), Non-Operational
SFF: Random vibration at 0.008G²/Hz,
10Hz to 500Hz, (2 Grms nominal).
Acoustic Noise Listed are the declared A-WEIGHTED SOUND POWER LEVELS (LWAd) and
declared average desktop seated operator position A-WEIGHTED SOUND
PRESSURE LEVELS (LpAm) when the product is operating in a 73.4°F (23°C)
ambient environment. Noise emissions were measured in accordance with ISO
7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
MT : IDLE (Fixed disk drive
spinning)
SFF : IDLE (Fixed disk drive
spinning)
LWAd = 4.3 Bels,
Desktop Average LpAm = 32 dBA
LWAd = 4.3 Bels,
Desktop Average LpAm = 32 dBA
QuickSpecs
HP Pro 3000 Business PC
System Details
DA - 13483 North America — Version 8 — March 7, 2011 Page 13