Weight & Dimensions
(MT)
Chassis Dimensions
(H x W x D)
15.14 x 7.27 x 16.36 in
385 x 185 x 416 mm
Packaged Dimensions
(D x L x W)
19.63 x 24.13 x 10.56 in
498.6 x 613 x 268.2 mm
System Weight
16.7 lb (7.58 kg)
Shipping Weight
24.77 lb (11.24 kg)
Weight & Dimensions
(SFF)
Chassis Dimensions
(H x W x D)
3.98 x 13.35 x 15.24 in
101 x 339 x 387 mm
Packaged Dimensions
(L x W x H)
23.38 x 19.68 x 9.0 in
593.8 x 500.0 x 228.6 mm
System Weight
14.9 lb (6.76 kg)
Shipping Weight
22.77 lb (10.33 kg)
Technology and Features
Memory Type
PC3-10600 DDR3 SDRAM (1066/1333MHz) non-ECC
Up to 8 GB system memory standard
NOTE:
Memory runs at maximum system supported speed of 1066 MHz, or at 800 MHz when processor
has 800-MHz FSB. For systems configured with more than 3 GB of memory and a 32-bit operating system,
all memory may not be available due to system resource requirements. Addressing memory above 4 GB
requires a 64-bit operating system.
Hard Drive Interfaces
Supported
Serial ATA, RAID and NCQ support
Chassis
Front Panel
Power button
Power On LED
HDD Activity LED
Reset/recovery button (MT only)
*
Cooling Solutions
Supported
Power Supply Fan (variable speed)
Active heatsink (variable speed)
Chassis fan (variable speed) (MT only)
Slots Supported
Four (4) full-height expansion slots
Front I/O
MT: Two (2) USB 2.0 ports, Headphone, Mic
SFF: Two (2) USB 2.0 ports, Headphone, Mic
Rear I/O
Standard Micro ATX I/O connectors, including six (6) USB 2.0 ports, serial ports
Drive Bays (MT)
Two (2) 5.25-inch (13.335 cm) half height external
One (1) 3.5-inch (8.89 cm) half height external
Two (2) 3.5-inch half height internal
Drive Bays (SFF)
One (1) 5.25-inch half height external
One (1) 3.5-inch half height external
One (1) 3.5-inch half height internal
Internal Speaker
For LANA region units; optional for APJ
QuickSpecs
HP Pro 3000 Business PC
System Details
DA - 13483 North America — Version 8 — March 7, 2011
Page 8
To Next Page
Loading...
