a. Middle frame and battery (see Middle frame and battery on page 15)
b. Rear-facing webcam (see Rear-facing webcam on page 19)
c. System board (see System board on page 20)
Remove the transfer board:
1. Disconnect the speaker cable (1) from the transfer board.
2. Detach the transfer board cable (2) from the middle frame. (The transfer board cable is attached to the
middle frame with double-sided adhesive.)
3. Detach the transfer board (3) from the middle frame. (The transfer board is attached to the middle
frame with double-sided adhesive.)
4. Remove the transfer board.
Reverse this procedure to install the transfer board.
Transfer board 25
To Next Page
Loading...
