EasyManua.ls Logo

HP ProBook 430 G1 - Navigating and selecting in Computer Setup; Restoring factory settings in Computer Setup

HP ProBook 430 G1
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When replacing the system board, be sure to remove the following components from the defective
system board and install on the replacement system board:
SIM card (see
SIM on page 44)
Memory module (see
Memory modules on page 45)
WLAN module (see
WLAN/Bluetooth combo card on page 48)
WWAN module (see
WWAN module on page 46)
Remove the system board:
1. Position the computer upright with the front toward you.
2. Disconnect the display cable (1) and the power cable (2) from the system board.
3. Remove the 2 Phillips PM2.0×4.0 screws (1) that secure the system board to the base enclosure.
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Table of Contents

Related product manuals