3.
Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
on the processor slot when you install the processor.
Reverse this procedure to install the processor.
Top cover
Description Spare part number
For use in model 4330s/4331s:
With a fingerprint reader and USB 3.0 646331-001
Without a fingerprint reader and with USB 3.0 646333-001
With a fingerprint reader and USB 2.0 658336-001
Without a fingerprint reader and with USB 2.0 658337-001
For use in model 4430s/4431s:
With a fingerprint reader and USB 3.0 646335-001
Without a fingerprint reader and with USB 3.0 646337-001
With a fingerprint reader and USB 2.0 658338-001
Without a fingerprint reader and with USB 2.0 658339-001
72 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
