HP ProBook 4340s - Page 28

Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post-consumer recycled plastic (by wt.)
This product is greater than 95.91% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
PAPER/Cardboard & misc 320 g
PAPER/Corrugated 51 g
Internal:
PLASTIC/Polyethylene low density 12 g
PLASTIC/EPE-Expanded Polyethylene 68 g
PLASTIC/PET 20 g
OTHER/OTHER 20 g
The PAPER/Cardboard & misc is made from 80% recycled content.
The PAPER/Corrugated is made from 80% recycled content.
The PLASTIC/Polyethylene low density is made from 65% recycled
content
The PLASTIC/EPE-Expanded Polyethylene is made from 65% recycled
content
The PLASTIC/PET is made from 65% recycled content
The OTHER/OTHER is made from 65% recycled content
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
QuickSpecs
HP ProBook 4340s/1s Notebook PC
Technical Specifications
DA - 14365 Worldwide — Version 7 — January 31, 2013 Page 28