To Next Page

To Previous Page

EL-MF877-00 Page 2

Template Revision C

Last revalidation date 09-May-2018

HPI instructions for this template are available at EL-MF877-01

Item Description

Notes

Quantity of

items

included in

product

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing refractory

ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and

materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Screwdriver

Plum Screwdriver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment

including the required steps to remove the external enclosure:

1. Use screwdriver to release base cover #1 screw 7PCS, and disassemble base cover from hinge side

2. Use screwdriver to release battery screw 3 PCS and release Battery

3. Use screwdriver to release main board #1 screw 11 PCS

4. Release below cable: Speaker cable, DC-IN Cable, HDD cable, Finger Printer cable, backlight cable, TP cable , SD

card cable, KB Cable, Power board cable ,EDP cable ,WWan antenna cable, Wlan antenna cable. And

Disassemble Type-C BKT, RJ-45.

5. release Main board

6. release hinge screw and remove hinge up

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the

product that require selective treatment (with descriptions and arrows identifying locations).

1 Use screwdriver to release base cover #1 screw 7PCS, and disassemble base cover from hinge side

Questions and Answers:

Need help?

Do you have a question about the HP ProBook 455 G6 and is the answer not in the manual?

HP ProBook 455 G6 Specifications

General

Operating System	Windows 10 Pro
Webcam	720p HD camera
Processor	AMD Ryzen 5 3500U
Graphics	AMD Radeon Vega Graphics
Display	15.6" FHD (1920 x 1080)
RAM	8 GB DDR4
Storage	256 GB SSD
Battery	3-cell, 45 Wh Li-ion
Weight	2 kg
Ports	1 RJ-45, 1 headphone/microphone combo
Wireless	Realtek 802.11ac (2x2) Wi-Fi and Bluetooth 4.2 Combo
Audio	Dual speakers