HP ProCurve 1410-24G

2-15
Installing the Switch
Installation Procedures
Using a Kensington Security Cable
To prevent unauthorized removal of the switch, you can use a Kensington Slim
MicroSaver security cable (not included) to attach the switch to an immovable
object.
Figure 2-10. Using a Security Cable with the 1410-8G Switch or 1410-16G Switch
Figure 2-11. Using a Security Cable with the 1410-24G Switch
4. Connect the Switch to a Power Source
1. For the 1410-8G Switch and 1410-16G Switch, plug the AC/DC adapter’s
power cord into the switch, and then plug the AC/DC power adapter into
a nearby AC power source.
For the 1410-24G Switch, plug the included power cord into the switch’s
power connector and into a nearby AC power source.