HP ProLiant DL320e - Page 3

Version
5.3.0
Description
HP SUM is a technology you can use to update firmware and software on HP ProLiant servers, and
firmware on HP Integrity servers. The HP Service Pack for ProLiant (SPP) and HP Integrity Smart Update
Firmware bundles include the version of HP SUM that HP recommends using for the set of updates.
HP SUM updates servers, enclosures, and other components in your server environment.
HP SUM provides a GUI and a command-line scriptable interface for:
• Deployment of firmware for single or one-to-many HP servers and network-based targets such as
iLO, OA, and VC Ethernet and Fibre Channel modules.
• Deployment of drivers, agents, and tools for single or one-to-many HP ProLiant servers (supported
in Windows and Linux environments).
Operating systems and devices
HP ProLiant servers
This version of HP SUM is delivered with HP Service Pack for ProLiant (SPP) version SPP 2012.10.0.
For more information about this product, see the HP Service Pack for ProLiant Information Library at
http://www.hp.com/go/spp/documentation.
HP Integrity servers
HP SUM can deploy firmware to the following servers:
• HP Integrity Superdome 2
• HP Integrity BL860c i2
• HP Integrity BL860c i4
• HP Integrity BL870c i2
• HP Integrity BL870c i4
• HP Integrity BL890c i2
• HP Integrity BL890c i4
• HP Integrity rx2800 i2
• HP Integrity rx2800 i4
HP SUM must be running on a supported Windows or Linux system as noted in the HP Integrity Smart
Update Firmware bundle's Release Notes. HP SUM can update the supported target HP Integrity servers
that are running any OS or none at all at the time of the update.
For more information on HP Integrity Smart Update Firmware bundles, see the Manage HP Integrity
Servers Firmware Updates website at http://www.hp.com/go/smartupdate/integrity.
Supported switches
HP SUM supports the following switches:
• Brocade
16Gb
Minimum supported firmware version: 7.0.0x
◦
Description 3