To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant DL320e Gen8 v2 and is the answer not in the manual?
General| Processor | Intel Xeon E3-1200 v3 series |
|---|---|
| Processor Sockets | 1 |
| Memory | Up to 32GB |
| Memory Slots | 4 |
| Form Factor | 1U Rack |
| Memory Type | DDR3 UDIMM |
| Storage | Up to 4 LFF or 8 SFF drives |
| RAID Support | HP Dynamic Smart Array B120i |
| Expansion Slots | 1 PCIe 3.0 |
| Management | HP iLO |
Describes physical parts on the server's front.
Explains status indicators and controls on the front.
Details the physical parts on the server's rear.
Explains status indicators and controls on the rear.
Specifies the technical details of PCIe slots.
Identifies key components on the motherboard.
Shows the arrangement and numbering of memory slots.
Describes the function of the system maintenance switch.
Explains the Non-Maskable Interrupt feature for diagnostics.
Details the sequential numbering of drive bays.
Explains the status LEDs for hot-plug drives.
Explains the status LEDs for the FBWC module.
Identifies the physical locations of the server's system fans.
Step-by-step guide to turn on the server.
Procedures for safely shutting down the server.
Instructions for sliding the server partially out of its rack.
Steps to fully detach the server from its rack.
Guide for removing the front panel security bezel.
Steps to remove the server's outer cover.
Instructions for reinstalling the server's cover.
Guide to removing the internal air ducting.
Steps to reinstall the internal air ducting.
Instructions for uninstalling the PCI expansion slot assembly.
Guide for installing the PCI expansion slot assembly.
Information on HP Care Pack and support services.
Guidelines for ideal server placement and conditions.
Specifies physical space and ventilation needs for the server.
Details the acceptable operating temperature ranges.
Outlines electrical power specifications and guidelines.
Explains proper grounding procedures for safety.
Lists general safety advisories for server operation.
Safety precautions related to rack installation and stability.
Lists items included in the server packaging.
Step-by-step guide for mounting the server in a rack.
Instructions on securing cables to rack rails.
Guide to initial server startup and boot menu choices.
Provides guidance on the operating system installation process.
Information on how to register the product with HP.
Configuration steps for an optional network switch.
General advice for installing multiple hardware options.
How to install the optional security bezel.
Overview of supported drive types and configurations.
General recommendations for installing drives.
Step-by-step guide for installing non-hot-plug drives.
Step-by-step guide for installing hot-plug drives.
Information on available storage controller options.
Guide for installing a storage controller card.
Instructions for installing FBWC and capacitor.
How to install an optional optical drive.
Overview of server memory capabilities.
Details on HP's certified memory technology.
How to identify and interpret DIMM specifications.
Explanation of DIMM ranking types.
Description of how memory is organized.
Information on Error-Correcting Code memory.
Rules for installing memory modules.
Step-by-step instructions for installing a DIMM.
Information on installing expansion cards.
How to install an internal USB connector.
Overview of the TPM hardware option.
Steps to install the TPM board.
Procedures for saving BitLocker recovery information.
Steps to enable the TPM in the system BIOS.
General guidelines and best practices for server cabling.
Cabling instructions specific to storage devices.
Cabling for specific drive cage configurations.
Cabling for hot-plug LFF drive bays.
Cabling for SFF hot-plug bays.
Specific cabling instructions for the optical drive.
General guidance for connecting power supplies.
Detailed cabling for the 250W PSU.
Detailed cabling for the 300W PSU.
Detailed cabling for the 750W DC PSU.
Cabling instructions for internal USB connections.
Cabling for the front panel input/output board.
Overview of utility operating modes (online/offline).
Reference for detailed product specifications and options.
Description of the Integrated Lights-Out management subsystem.
Details on the system health monitoring and logging feature.
Explains the system event log and its viewing methods.
Information on remote hardware monitoring and support.
Method for connecting to HP support remotely.
Direct server connection to HP's online support portal.
Details the online dashboard for managing IT data.
Tool for automating server deployments.
Embedded tool for server setup and OS deployment.
Utility for system diagnostics and troubleshooting.
Describes the diagnostic survey features.
Utility for resetting the system to factory defaults.
Comprehensive update package for servers.
Tool for managing firmware and driver updates.
BIOS configuration utility for system settings.
Instructions on how to operate the RBSU.
Explanation of the automatic system configuration process.
Describes the choices available during the server boot process.
Settings for Advanced Memory Protection features.
Steps to update serial/product IDs after board replacement.
An overview of the various system utilities available.
Utility for creating and managing RAID arrays.
Management tool for HP Smart Array controllers.
Utility for initial RAID array setup.
Utility for upgrading system firmware (BIOS).
Feature that automatically restarts the server on critical errors.
Information on supported USB devices and functionality.
Details on the server's redundant ROM feature.
Explains benefits related to ROM flashing procedures.
Guidance on maintaining up-to-date software and firmware.
Information on accessing HP support resources.
Guidance on installing and updating device drivers.
Instructions for updating system software and firmware.
Tools for managing software and firmware versions.
Lists supported OS versions.
Overview of HP's technology service offerings.
Information on HP product change notifications.
Lists guides and documentation for resolving issues.
Procedures for replacing the server's system battery.
General safety and regulatory compliance information.
Specific compliance markings for these regions.
RoHS compliance statement for Turkey.
RoHS compliance statement for Ukraine.
Details on the product warranty coverage and terms.
Precautions to avoid damage from static electricity.
Techniques and tools for proper grounding.
Operating and non-operating environmental limits.
Physical dimensions and weight of the server.
Details on the available power supply units.
Technical specifications for the 250W PSU.
Technical specifications for the 300W PSU.
Technical specs for the 750W DC PSU.
Information to have ready before contacting HP support.
Contact details and methods for reaching HP support.
Information about HP's program for customer-performed repairs.
Definitions of technical terms and abbreviations used.
Instructions on how to provide feedback on the manual.
