HP ProLiant DL385p Gen8 User Manual

HP ProLiant DL385p Gen8 Server
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 661850-002
February 2013
Edition: 2

HP ProLiant DL385p Gen8 Specifications

General

Form Factor	2U Rack
Processor	AMD Opteron 6300 series
Memory	Up to 768 GB DDR3
Storage	Up to 16 SFF or 8 LFF drives
RAID Support	HP Smart Array P420i Controller
Network	4 x 1GbE ports
Network Controller	HP Ethernet 1Gb 4-port 331i Adapter
Power Supply	1200W
Management	HP iLO Management Engine

Summary

Component Identification

Front and Rear Panel Components

Identifies components and LEDs on the front and rear panels of the server.

System Board and Internal Components

Details key internal components like the system board, maintenance switch, and DIMM slots.

Drive and Expansion Slot Indicators

Explains drive numbering, drive LEDs, PCIe riser cage LEDs, and FBWC module LEDs.

Operations

Power Management and Rack Handling

Procedures for server power management and rack installation/removal.

Internal Component Access and Removal

Guides for accessing internal components, removing panels, fan cages, and riser assemblies.

Setup

Environmental, Power, and Grounding Requirements

Guidelines for environment, power, and electrical grounding for server installation.

Rack Installation Safety and Procedures

Safety warnings and procedures for installing the server into a rack.

Hardware Options Installation

Processor and Memory Installation

Procedures for installing server processors and memory modules (DIMMs).

Storage and Controller Options

Instructions for installing hot-plug hard drives, cache modules, and controller options.

Expansion Board and Riser Cage Installation

Guides for installing PCIe expansion boards, riser cages, and related components.

Cabling

Cabling Procedures

Diagrams and instructions for connecting SAS, SATA, FBWC, and PCIe components.

Software and Configuration Utilities

Server Management Utilities Overview

Introduction to server management utilities like iLO, Insight Diagnostics, and Intelligent Provisioning.

System Configuration Tools

Information on using HP Smart Update Manager and ROM-Based Setup Utility (RBSU).

Troubleshooting

Troubleshooting Resources

Guides and resources for troubleshooting server issues and error messages.

Battery Replacement

Battery Replacement Procedure

Procedures for safely replacing the server's internal battery.

Regulatory Information

Safety, Environmental, and Compliance

Information on safety, environmental regulations, and compliance notices.

Electrostatic Discharge

Preventing Electrostatic Discharge

Guidelines and methods for preventing electrostatic discharge damage.

Specifications

Environmental and Mechanical Specs

Technical specifications for environment, dimensions, and weight.

Power Supply Specifications

Details on various power supply options, including their wattage and efficiency.

Support and Other Resources

Contacting HP and Service Information

Information on how to contact HP support and details on Customer Self Repair (CSR).