HP ProLiant DL385p Gen8 - Specifications; Environmental and Mechanical Specs; Power Supply Specifications

Specifications 116
Specifications
Environmental specifications
Specification Value
Temperature range*
Operating
10
°
C to 35
°
C (50
°
F to 95
°
F)
Shipping
-30°C to 50°C (-22°F to 122°F)
Storage
-30°C to 60°C (-22°F to 140°F)
Maximum wet bulb
temperature
28°C (82.4°F)
Relative humidity
(noncondensing)**
Operating
10% to 90%
Non-operating
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
Mechanical specifications
Specification Value
Height
8.73 cm (3.44 in)
Depth, SFF
69.85 cm (27.50 in)
Depth, LFF
74.93 cm (29.5 in)
Width
44.55 cm (17.54 in)
Weight, 8 LFF
22.63 kg-30.19 kg (49.9 lb- 66.5
lb)
Weight, 12 LFF
20.02 kg- 32.66 kg (44.1 lb- 72 lb)
Weight, 8 SFF
23.53 kg- 28.08 kg (51.9 lb- 61.9
lb)
Weight, 16 SFF
19.92 kg−27.76 kg (43.9 lb−61.2
lb)
Weight, 25 SFF
21.15 kg−28.37 kg (46.6 lb−62.5
lb)
Power supply specifications
Depending on installed options, the server is configured with one of the following power supplies:
• HP 460 W CS Gold power supply (92% efficiency) (on page 117)