Need help?Do you have a question about the HP ProLiant DL360 G6 and is the answer not in the manual?
General| Processor | Intel Xeon 5500 and 5600 series |
|---|---|
| Processor Sockets | 2 |
| Chipset | Intel 5520 |
| Memory | Up to 192 GB DDR3 |
| Memory Slots | 18 DIMM slots |
| Form Factor | 1U Rack |
| Management | HP Integrated Lights-Out 2 (iLO 2) |
| Storage | Up to 8 SFF SAS/SATA drives |
| RAID Controller | HP Smart Array P410i |
| Network | 4 x 1GbE ports |
| Power Supply | 460W, 750W, or 1200W hot-plug |
| Expansion Slots | 2 PCIe Gen2 x8 slots |
| Operating System Support | Windows, Linux, VMware |
Identifies and describes the components located on the front panel of the server.
Identifies and describes the components located on the rear panel of the server.
Details the various components and connectors found on the server's system board.
Explains the status indicators for SAS and SATA hard drives.
Provides step-by-step instructions for safely powering down the server.
Describes the procedure for extending the server chassis out of the rack for access.
Details the steps required to remove the server's access panel for internal access.
Guides on how to install the PCI riser board assembly into the server.
Specifies the necessary clearances and airflow conditions for optimal server operation.
Outlines the electrical power requirements and guidelines for server installation.
Provides instructions for physically installing the server into a rack.
Describes the methods and steps for installing a supported operating system.
Instructions for installing or replacing the processor and fan modules.
Details memory types, speeds, and configurations supported by the server.
Step-by-step guide for installing a DIMM into the server's memory slots.
Information on installing and managing hot-plug SAS and SATA hard drives.
Overview of SmartStart software for server deployment and configuration.
Describes the ROM-Based Setup Utility for server configuration.
Information on HP Systems Insight Manager for system administration.
Details various diagnostic tools available for server health checks and troubleshooting.
Essential preliminary steps and considerations before troubleshooting server issues.
Guidance on collecting relevant information about server problems.
A flowchart to diagnose and resolve issues related to the server not powering on.
A flowchart to diagnose issues when the server does not complete Power-On Self-Test.
Details operating and shipping environmental requirements for the server.
Provides physical dimensions and weight specifications for the server.
Lists the electrical input and output specifications for server power supplies.
Information to gather before contacting HP for technical support.
Details HP's Customer Self Repair program for parts replacement.
To Next Page
