Do you have a question about the HP ProLiant DL360 Gen10 and is the answer not in the manual?
HDD size | - \ |
---|---|
HDD interface | - |
Optical drive type | No |
Supported HDD sizes | 2.5 \ |
Total storage capacity | 0 GB |
Maximum storage capacity | 22 TB |
Number of HDDs installed | 0 |
Number of HDDs supported | 8 |
Supported storage drive interfaces | Serial ATA |
Tcase | 77 °C |
Stepping | U0 |
Scalability | 2S |
Processor code | SR3GL |
Processor cache | 11 MB |
Processor model | 3106 |
System bus rate | - GT/s |
Processor socket | LGA 3647 (Socket P) |
Processor codename | Skylake |
Execute Disable Bit | Yes |
Processor frequency | 1.7 GHz |
Processor cache type | L3 |
Processor lithography | 14 nm |
Processor manufacturer | Intel |
Processor package size | 76.0 x 56.5 mm |
Processor operating modes | 64-bit |
Thermal Design Power (TDP) | 85 W |
Number of processors installed | 1 |
Maximum number of PCI Express lanes | 48 |
Memory types supported by processor | DDR4-SDRAM |
Memory channels supported by processor | Hexa |
Memory clock speeds supported by processor | 2133 MHz |
Maximum internal memory supported by processor | 768 GB |
Compatible operating systems | Windows Server 2012 R2 Windows Server 2016 VMware ESXi 6.0 U3 VMware ESXi 6.5 & U1 Red Hat Enterprise Linux (RHEL) 6.9 & 7.3 SUSE Linux Enterprise Server (SLES) 11 SP4 & 12 SP2 ClearOS CentOS |
Memory slots | 24x DIMM |
Internal memory | 32 GB |
Memory clock speed | 2666 MHz |
Memory layout (slots x size) | 2 x 16 GB |
Ethernet interface type | Gigabit Ethernet |
Power supply | 500 W |
Sustainability certificates | ENERGY STAR |
Chassis type | Rack (1U) |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Ethernet LAN (RJ-45) ports | 4 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
PCI Express slots version | 3.0 |
Processor ARK ID | 123540 |
Intel TSX-NI version | 1.00 |
Depth | 707 mm |
---|---|
Width | 434.6 mm |
Height | 42.9 mm |
Procedures for safely powering the server up, down, and into standby mode.
Specifies requirements for optimal server operation regarding ambient conditions and power.
Covers electrical grounding requirements and safety warnings for rack installation.
Explains memory configurations, DIMM identification, and installation.
Guides installation of SAS, SATA, and NVMe drives.
Details installation of PCI riser cages and expansion boards.
Provides instructions for installing HPE Smart Array controller options.