Need help?Do you have a question about the HP DL360 - ProLiant - G3 and is the answer not in the manual?
General| Product Line | ProLiant |
|---|---|
| Model | DL360 G3 |
| Processor | Intel Xeon |
| Number of Processors Supported | 2 |
| Form Factor | 1U |
| Chipset | Intel E7501 |
| Memory Type | PC2100 DDR SDRAM |
| Hard Drive Interface | Ultra320 SCSI |
| RAID Levels | 0, 1, 5 |
| Power Supply | Hot-plug redundant |
| Server Type | Rack |
| Networking | 2 x Gigabit Ethernet |
| Expansion Slots | 2 PCI-X |
| Operating System Support | Microsoft Windows, Linux |
| Storage | Hot-plug SCSI |
Provides a step-by-step overview of the server installation procedures.
Details the electrical requirements and safety precautions for powering the server.
Explains the importance and methods for proper server grounding.
Provides guidelines and procedures for installing server memory modules.
Provides instructions for installing hot-plug hard drives into the server.
Outlines the steps to install a second processor and its power module.
Describes how to install a redundant power supply for increased reliability.
Introduces the RBSU for system configuration and management.
Describes SmartStart for system software installation and diagnostics.
Introduces Insight Manager for server monitoring and management.
Provides step-by-step instructions for startup problems.
Offers guidance for determining the cause of server issues.
Addresses issues that occur after the server passes POST.
Provides instructions and warnings for replacing the server's internal battery.
Provides crucial safety information before product installation.
To Next Page
