Server Installation
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide 3-5
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: d-ch3 Server Installation.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:19 AM
Installing the Server into the Rack
CAUTION: To avoid destabilizing the rack, install multiple servers starting from the
bottom of the rack.
CAUTION: Always mount the heaviest item on the bottom of the rack, and work
from the bottom to the top.
To install the server into the rack:
1. Align the rear end of the fixed server rails (1), with the front end of the universal
rack rails (2).
WARNING: The rail release latches can pinch your fingertips.
2. Press the rail release latches and slowly slide the server into the rack.
Figure 3-4: Aligning the rear end of the fixed server rails
with the front end of the universal rack rails
To Next Page
Loading...
