Server Installation
3-6 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: d-ch3 Server Installation.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:19 AM
CAUTION: Keep the server parallel to the floor when sliding the fixed server rails
into the rack rails. Tilting the server can damage the rails.
3. Insert the server into the rack. Be sure that the fixed server rails slide inside the
universal rack rails.
4. Slide the server fully into the rack.
5. Tighten the thumbscrews on the front panel by turning them clockwise to secure
the server to the rack.
6. At the rear of the rack, fasten the thumbscrew that secures the cable tray to the
universal rack rail.
To Next Page
Loading...
