HP DL360 - ProLiant - G3 - Front Panel LED Indicators

LEDs, Switches, and Jumpers
E-2 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: j-appe LEDs, Switches, and Jumpers.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:23 AM
Front Panel LED Indicators
The set of six LEDs on the front of the server indicates server status. The following
figure and table identify and describe the location and function of the LEDs.
Figure E-1: Identifying the front panel LED indicators
Table E-1: Identifying the Front Panel LED Indicators
Location LED Status
1 Unit Identification
LED/button
Blue = Activated
Blinking = System remotely managed
Off = Deactivated
2 Internal health LED Red = System critical. Refer to system board LEDs to
identify component in critical state.
Amber = System degraded. Refer to system board LEDs to
identify component in degraded state.
Green = Normal
3 External health LED
(power supply)
Amber = Power redundancy failure
Green = Normal
continued