Server Installation
3-8 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: d-ch3 Server Installation.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:19 AM
3. Attach the rail cable strap (1) and tighten the thumbscrew (2).
Figure 3-6: Attaching the rail cable strap (cable tray and
server removed for clarity)
Connecting the Peripheral Device Cables and
Power Cord
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the Network Interface
Controller (NIC) connectors.
Use the following figure and table to identify connectors. Connect the power
cord last.
To Next Page
Loading...
