HP DL360 - ProLiant - G3 - Rear Panel LED Indicators

LEDs, Switches, and Jumpers
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide E-3
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: j-appe LEDs, Switches, and Jumpers.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:23 AM
Table E-1: Identifying the Front Panel LED Indicators continued
Location LED Status
4 NIC 1 link/activity LED Green = Network link
Blinking = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs.
5 NIC 2 link/activity LED Green = Network link
Blinking = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs.
6 Power On/Standby
button/system power
LED
Amber = System shut down, but power still applied
Green = System on
Off = Power cord not attached or power supply failure
Rear Panel LED Indicators
The server rear panel contains five LEDs: one for the rear unit identification LED
switch, two for the iLO connector, and two for the RJ-45 connectors. Use the
following figure and table to identify each LED.
Figure E-2: Identifying the rear panel LED indicators