Planning the Server Installation
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide 1-7
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: b-ch1 Planning the Server Installation.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:15 AM
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
• Unplug the power cord from the power supply to disconnect power to the
equipment.
CAUTION: Protect the server from power fluctuations and temporary interruptions
with a regulating uninterruptible power supply (UPS). This device protects the
hardware from damage caused by power surges and voltage spikes and keeps the
system in operation during a power failure.
CAUTION: Do not operate the server for long periods without the access panel.
Operating the server without the access panel results in improper airflow and
improper cooling that can lead to thermal damage.
Server Shipping Contents
Unpack the server box, and locate the materials and documentation for installing the
server. All rack-mounting hardware for installing the server into the rack is included
with the rack or the server.
In addition to these supplied items, the following items may be needed:
• Application software diskettes
• Options to be installed
• Phillips screwdriver
To Next Page
Loading...
