Electrostatic Discharge
B-2 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: g-appb Electrostatic Discharge.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:21 AM
Grounding Methods
There are several methods for grounding. Use one or more of the following methods
when handling or installing electrostatic-sensitive parts:
• Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1 megaohm
± 10 percent resistance in the ground cords. To provide proper grounding, wear
the strap snug against the skin.
• Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor mats.
• Use conductive field service tools.
• Use a portable field service kit with a folding static-dissipating work mat.
If the suggested equipment for proper grounding is not available, have an HP
authorized reseller install the part.
NOTE: For more information on static electricity or for assistance with product installation,
contact an HP authorized reseller.
To Next Page
Loading...
