Installing Hardware Options
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide 2-13
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: c-ch2 Installing Hardware Options.doc
Codename: Ertl Part Number: 293974-001 Last Saved On: 10/16/02 1:34 PM
Installing or Replacing an Optical Device
To install the optical device drive:
1. Push the optical device ejector button (1) to eject the optical drive (2).
NOTE: Access to the ejector button is intentionally restricted. Push the ejector button with
a small flat object such as a key or pen to eject optical drive.
Figure 2-8: Ejecting the optical drive
To Next Page
Loading...
