HP ProLiant DL385p Gen8 - Page 66

Removal and replacement procedures 66
7.
Remove the PCIe riser cage ("Remove the primary PCIe riser cage" on page 35, "Remove the
secondary PCIe riser cage" on page 36).
8. If installed, remove the secondary PCIe riser cage (on page 36).
9. If installed, remove the FBWC capacitor pack ("Flash-backed write cache capacitor pack" on page
51).
10. If installed, remove the cache module ("Flash-backed write cache module" on page 49).
11. Remove the FlexibleLOM ("FlexibleLOM" on page 44).
12. Remove all DIMMs ("DIMMs" on page 63).
13. Remove the fan cage ("Fan cage" on page 44).
14. Remove the power supply backplane ("Power supply backplane" on page 41).
15. Disconnect all cables connected to the system board.
16. Remove the heatsink ("Heatsink" on page 57).
17. Remove the processor ("Processor" on page 59).
18. Remove left and right fan cage brackets.
19. Loosen the system board thumbscrews.