Component identification 90
Item Description
22
SD card slot
23
Secondary (processor 2) PCIe riser connector
24
Processor 2 socket
25
System battery
26
TPM connector
27
Primary (processor 1) PCIe riser connector
28
Processor 1 socket
29
FlexibleLOM
30
SAS port 1i
31
SAS port 2i
32
SAS cache module connector
System maintenance switch
Position Default Function
S1
Off Off = HP iLO security is enabled.
On = HP iLO security is disabled.
S2
Off Off = System configuration can be
changed.
On = System configuration is locked.
S3
Off Reserved
S4
Off Reserved
S5
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off Off = No function
On = ROM reads system configuration
as invalid.
S7
— Reserved
S8
— Reserved
S9
— Reserved
S10
S11
— Reserved
S12
— Reserved
To access redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
NMI functionality
An NMI crash dump enables administrators to create crash dump files when a system is hung and not
responding to traditional debug mechanisms.
To Next Page
Loading...
