System Fans
One of the following
depending on Model
2P Models have (6) (N+1 redundancy standard)
1P Models have (4) (N+1 redundancy standard)
Required Cabling
For required cabling information, refer to the HP Web site at:
www.hp.com/servers/dl385p-gen8
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
and our driver download page:
http://www.hp.com/support/DL385pGen8
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
One of the following
depending on Model
2U Rack form factor
NOTE:
All pre-configured Models ship with Ball-Bearing sliding rails and cable management arm. Any
customer configured models through HP Factory Integration must select the appropriate Rail Kit when
configuring.
8 SFF Drive Bay Version:
3.44 (8.74 cm) Height x 17.54" (44.55 cm) Width x 27.5" (69.85 cm) Length
8 LFF Drive Bay Version:
3.44 (8.74 cm) Height x 17.54" (44.55 cm) Width x 29.5" (74.94cm) Length
12 LFF Drive Bay Version:
3.44 (8.74 cm) Height x 17.54" (44.55 cm) Width x 29.5" (74.94cm) Length
25 SFF Drive Bay Version:
3.44 (8.74 cm) Height x 17.54" (44.55 cm) Width x 27.5" (69.85 cm) Length
QuickSpecs
HP ProLiant DL385p Generation 8 (Gen8)
Standard Features
DA - 14329 North America — Version 11 — December 4, 2012
Page 8
To Next Page
Loading...
Need help?
General
