HP ProLiant MicroServer Generation 8 - Page 2

Processor Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
NOTE: Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to
1333MHz DDR3 memory speed.
Intel® Core™ i3-3240 (3.4GHz/2-core/3MB/65W) Processor
NOTE: Intel® Core® i3-3240 support up to 1600MHz DDR3 memory speed.
Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
NOTE: Intel® Xeon® E3-1220Lv2 supports up to 1600MHz DDR3 memory speed.
Cache Memory 3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium and Xeon processors.
2MB (1 x 2MB) L3 Cache
NOTE: For Dual-core Celeron processor.
NOTE: All processor models above list the L3 Cache associated with that particular
processor.
Chipset Intel® C204 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following
URL:
http://www.intel.com/products/server/chipsets/ .
On System
Management
Processor
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo .
Memory Protection ECC
Memory Type HPE SmartMemory
DDR3 Unbuffered (UDIMM)
DIMM Slots Available 2
Standard 4GB (1 x 4GB) PC3L-12800E DDR3 UDIMM
Maximum 16GB (2 x 8GB) PC3-12800E DDR3 UDIMM
NOTE: HPE memory from previous generation servers are not fully compatible with
the HPE ProLiant MicroServer Gen8.
Network Controller HPE Ethernet 1Gb 2-port 332i Adapter
QuickSpecs
HPE ProLiant MicroServer Generation 8 (Gen8)
Standard Features
DA - 14565 Worldwide QuickSpecs — Version 24 — 12.17.2015 Page 2