HP ProLiant MicroServer

HP ProLiant MicroServer
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 615717-006
December 2012
Edition: 6

HP ProLiant MicroServer Specifications

General

Maximum Memory	16GB
RAID Support	RAID 0, 1, 10
Network	1 x Gigabit Ethernet port
Expansion Slots	1 x PCIe 2.0 x1
Power Supply	150W
Form Factor	Micro Tower
Drive Bays	4 x 3.5" internal drive bays
Dimensions	9.65 x 9.65 inches (245 x 245 mm)
Storage	Up to 4 x 3.5" SATA

Summary

HP Server Operations

Safely Power Down Server

Steps to safely shut down and disconnect power from the server.

Server Setup and Environment

Electrical Grounding Requirements

Explains necessary grounding procedures for safety and operation.

Hardware Installation Guide

Preventing Electrostatic Discharge

Precautions to prevent damage to components from static electricity.

SATA Drive Installation

Memory Module Installation (DIMMs)

Server Troubleshooting Guide

Pre-Diagnostic Steps

Important Safety Information

Critical safety warnings for handling the server and its components.

Troubleshooting Flowcharts

Provides a systematic approach to diagnosing problems.

Power-On Problems Flowchart

Flowchart for diagnosing issues related to server power.

Hardware Problems Overview

Electrostatic Discharge Precautions

Preventing Static Discharge Damage

Grounding Methods for ESD Prevention