HP ProLiant MicroServer User Manual

Hardware options installation 20
12.
Use the HP ProLiant MicroServer key to lock the panel door.
RDX drive option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).
To install the component:
1. Power down the server (on page 6).
2. Place the server on a flat, level work surface.
3. Open the panel door (on page 6).
4. Loosen the rear thumbscrew that locks the top panel on the chassis.

HP ProLiant MicroServer Specifications

General

Maximum Memory	16GB
RAID Support	RAID 0, 1, 10
Network	1 x Gigabit Ethernet port
Expansion Slots	1 x PCIe 2.0 x1
Power Supply	150W
Form Factor	Micro Tower
Drive Bays	4 x 3.5" internal drive bays
Dimensions	9.65 x 9.65 inches (245 x 245 mm)
Storage	Up to 4 x 3.5" SATA