To Next PageTo Next Page
Need help?Do you have a question about the HP Enterprise ProLiant MicroServer Gen10 and is the answer not in the manual?
General| Memory | Up to 32GB DDR4 ECC UDIMM |
|---|---|
| Memory Slots | 2 |
| Expansion Slots | 1 x PCIe 3.0 x8 slot |
| Remote Management | HPE iLO 5 Standard |
| Storage | 4 x LFF SATA drive bays |
| RAID Support | RAID 0, 1, 10 |
| Network | 2 x 1GbE ports |
| Power Supply | 200W |
| Form Factor | Micro Tower |
| Weight | 6.5 kg |
| Processor | AMD Opteron X3000 Series |
| USB Ports | 4 x USB 3.0, 2 x USB 2.0 |
| Dimensions | 23.5 x 23.0 x 24.5 cm |
Details the front panel elements like drive bays, LEDs, and ports.
Explains the status indicators and power button on the front panel.
Identifies ports and connectors on the rear of the server.
Identifies key components on the server's motherboard.
Explains how to interpret the label on a DIMM module.
Details the specifications and types of PCIe slots available.
Outlines choices for performing the first-time server setup.
Provides a step-by-step guide for initial server configuration.
Specifies ideal site, space, airflow, and temperature conditions for server operation.
Highlights critical safety and operational advisories for server handling.
Provides precautions to prevent damage from static electricity during handling.
Instructions on how to turn on the server and verify status.
Steps for safely shutting down and entering standby mode.
Procedures to safely prepare the server before working on hardware.
Instructions for detaching the front bezel for access.
Steps to remove the main enclosure cover for internal access.
Instructions for installing the motherboard into the chassis.
Details on supported LFF/SFF drives and controller capabilities.
Step-by-step guide to install a Large Form Factor drive.
Instructions for installing a Small Form Factor drive using a converter.
Procedure for installing a 7-mm slim-type SATA SSD in the media bay.
Procedure for installing a 9.5 mm slim-type SATA optical drive.
Best practices for safely handling DIMM modules.
Detailed steps for installing a memory module into the server.
Steps to install a HPE Smart Array controller card.
Procedure for installing a PCIe expansion card.
Details on the TPM hardware security feature and its benefits.
Important cautions and guidelines for handling TPMs.
Overview of the system's BIOS setup utility and its functions.
Procedure to change the server's boot mode (UEFI/Legacy).
Methods to reset BIOS settings by clearing CMOS.
Utility for managing RAID arrays on the Marvell controller.
Software utility for managing Marvell RAID arrays.
Tool for configuring HPE Smart Array controllers.
Links to guides and support pages for troubleshooting issues.
Step-by-step guide to replace the system battery.
Details operating and non-operating environmental conditions.
Physical dimensions and weight of the server.
Information on the server's 200 W power supply.
