HP Enterprise ProLiant MicroServer Gen10 User Manual

2. Install the screws in the drive.
3.
Slide the drive into the drive bay until it clicks into place.
Installing an SFF drive
To install SFF drives in the drive bays, install the SFF drive converter option. In general, SFF drives give greater power and
space savings. SFF drives can require as little as half the power and generate significantly less heat than LFF drives.
Hardware options installation
37

HP Enterprise ProLiant MicroServer Gen10 Specifications

General

Memory	Up to 32GB DDR4 ECC UDIMM
Memory Slots	2
Expansion Slots	1 x PCIe 3.0 x8 slot
Remote Management	HPE iLO 5 Standard
Storage	4 x LFF SATA drive bays
RAID Support	RAID 0, 1, 10
Network	2 x 1GbE ports
Power Supply	200W
Form Factor	Micro Tower
Weight	6.5 kg
Processor	AMD Opteron X3000 Series
USB Ports	4 x USB 3.0, 2 x USB 2.0
Dimensions	23.5 x 23.0 x 24.5 cm