Software and configuration utilities 32
• Force a PXE Network boot by pressing the F12 key.
ProLiant MicroServer Insight Diagnostics
The ProLiant MicroServer Insight Diagnostics utility displays information about the server hardware and tests
the system to verify proper operation. The utility can be accessed through the HP website
(http://www.hp.com).
Management tools
MicroServer Remote Access Card
The HP MicroServer remote access card is a standard component of selected HP MicroServer that provides
server health and remote server manageability. HP MicroServer remote access card includes a dedicated
network interface. This design makes HP MicroServer remote access card independent of the host server and
its operating system. The HP MicroServer remote access card provides remote access to any authorized
network client, sends alerts, and provides other server management functions.
Using HP MicroServer remote access card, you can do the following:
• Remotely power up, power down, or reboot the host server
• Send alerts from HP MicroServer remote access card, regardless of the state of the host server
USB support
HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by
the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB
devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available normally.
Specifically, HP provides legacy USB functionality for the following:
• POST
• RBSU
• Diagnostics
• DOS
• Operating environments which do not provide native USB support
Keeping the system current
Current drivers and utilities
For the latest drivers and utilities information on supported operating systems, see the HP website
(http://www.hp.com/support).
IMPORTANT: Always perform a backup before installing or updating device drivers.
To Next Page
Loading...
Need help?
General
