HP ProLiant MicroServer User Manual

Hardware options installation 16
b.
Close the ejector lever to secure the drive.
8. Close the panel door.
9. Use the HP ProLiant MicroServer key to lock the panel door.
Optical disc drive
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).
The removable media drive bay supports an optical drive, a tape drive or an RDX drive. The section
describes how to install an optical drive. For information on how to install an RDX drive, see "RDX drive
option (on page 20)."
To install the component:
1. Power down the server (on page 6).
2. Place the server on a flat, level work surface.
3. Open the panel door (on page 6).
4. Loosen the rear thumbscrew that locks the top panel on the chassis.

HP ProLiant MicroServer Specifications

General

Brand	HP
Model	ProLiant MicroServer
Category	Server
Language	English