HP ProLiant MicroServer User Manual

Hardware options installation 21
5.
Slide the top panel forward, and then lift it to release it from the chassis.
6. Use a screwdriver to toggle the metal faceplate off the top panel.
The metal faceplate is no longer needed when the removable media drive bay is occupied.
7. Connect the RDX cables:

HP ProLiant MicroServer Specifications

General

Maximum Memory	16GB
RAID Support	RAID 0, 1, 10
Network	1 x Gigabit Ethernet port
Expansion Slots	1 x PCIe 2.0 x1
Power Supply	150W
Form Factor	Micro Tower
Drive Bays	4 x 3.5" internal drive bays
Dimensions	9.65 x 9.65 inches (245 x 245 mm)
Storage	Up to 4 x 3.5" SATA