HPE Dynamic Smart
Array B120i
Controller
Dimensions
Embedded
Disk Drive Interface -
Transfer rate
Up to 6Gb/s SATA (Serial ATA)
SATA Connectors
5 internal connectors with non-hot-plug support
Server Interface
PCIe 3.0/2.0
SATA Speed
x2 6Gb/s SATA physical links (compatible with 3Gb/s SATA )
None
Logical Drives
Supported
NOTE:
On SATA models with embedded RAID, setup
instructions are located in the MicroServer User Guide
Host Memory
Addressing
64-bit, supporting greater than 4GB server memory space
Hot Plug Support
No
RAID Support
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
HPE Ethernet 1Gb 2-
port NC332i Adapter
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Energy Efficient Ethernet (EEE) compliant with IEEE Std
802.3az (default is disabled)
Data Transfer
Method
Single lane (x1), 100MHz PCI Express Reference Clock
Controller
BCM5720
Network Transfer
Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-
Duplex)
2000Mb/s
Connector
RJ-45 connector
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up
to 328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft
(100 m)
QuickSpecs
HPE ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
DA - 14565 Worldwide QuickSpecs — Version 24 — 12.17.2015
Page 32
To Next Page
Loading...
