Optical Drive
HP Half-Height SATA DVD ROM Kit
447326-B21
HP Half-Height SATA DVD-RW Optical Kit
447328-B21
Hard Drives
NOTE:
The components of a storage subsystem (e.g. the drive, the
HBA/controller, and firmware) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE:
Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE:
Supports up to 4 hard drives.
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
458939-B21
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
458947-B21
NOTE:
SATA drives have a 1 year warranty. Please see the QuickSpecs for
Technical Specifications and additional information:
http://h18004.www1.hp.com/products/quickspecs/13021_na/13021_na.html
SATA Non-Hot Plug Drives
NOTE:
The following previous generation of 1.5G SATA Hot Plug hard drives
are supported.
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO
404469-B21
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
411276-B21
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
411275-B21
NOTE:
SATA drives have a 1 year warranty. Please see the QuickSpecs for
Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
HP 600GB 6G SAS 15K 3.5" DP NHP ENT HDD
516830-B21
HP 450GB 6G SAS 15K 3.5" DP NHP ENT HDD
516826-B21
HP 450GB 3G SAS 15K 3.5" DP NHP ENT
454234-B21
HP 400GB 3G SAS 10K 3.5" DP NHP ENT
508232-B21
HP 400GB 3G SAS 10K 3.5" DP NHP ENT
508232-B21
HP 300GB 6G SAS 15K 3.5" DP NHP ENT HDD
516824-B21
HP 300GB 3G SAS 15K 3.5" DP NHP ENT
417950-B21
HP 146GB 3G SAS 15K 3.5" DP NHP ENT
417855-B21
Step 3: Choose Additional Options for Factory Integration
Storage Controller
HP SC40Ge SAS HBA, FIO
NOTE:
When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard
Drives are required.
449176-B21
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.
QuickSpecs
HP ProLiant ML110 Generation 5
Configuration Information-Factory Integrated Models
DA - 12867 U.S. QuickSpecs — Version 25 — 9-28-2009
Page 13
To Next Page
Loading...
