Removal and replacement procedures 54
9.
Install the IPMI card.
a. Align the card with the Lights-Out 100c upgrade connector, and then firmly seat the card on
the slot (1).
b. Secure the card with the screw you removed in step 4-a (2).
10. Perform the post-installation procedure.
System battery
The server uses a nonvolatile memory that requires a battery to retain system information when power
is removed. This 3-volt 200-mAh lithium coin cell battery is located on the system board.
If the server no longer automatically displays the correct date and time, the system battery that
provides power to the real-time clock may need to be replaced. Under normal use, battery life is 5 to
10 years.
To Next Page
Loading...
