Need help?Do you have a question about the HP ProLiant ML310 Generation 3 and is the answer not in the manual?
General| Maximum Processors | 1 |
|---|---|
| Maximum Memory | 8 GB |
| Memory Slots | 4 |
| Hard Drive Interface | SATA |
| Form Factor | Tower |
| CPU | Intel Pentium 4 |
| Memory Type | DDR2 |
| Storage Controller | Integrated SATA controller |
| Drive Bays | 4 x 3.5" |
| Network Controller | Broadcom NetXtreme Gigabit Ethernet |
| Power Supply | 400W |
| Operating System Support | Microsoft Windows Server |
| Expansion Slots | 1 x PCI Express x8 |
Diagrams and part numbers for mechanical components of the server.
Diagrams and part numbers for internal system components like processors and memory.
Essential safety precautions for handling server components and preventing damage.
Procedure for removing and replacing the processor and heatsink assembly.
Procedure for removing and replacing the system board.
Instructions for connecting hot-plug SCSI hard drives.
Instructions for connecting hot-plug SATA hard drives.
Server management tool for diagnostics and troubleshooting.
Procedures to recover the system ROM in case of corruption.
Identification of components on the front of the server.
Identification of components located on the system board.
Explains and interprets LEDs on SCSI, SAS, and SATA hard drives.
Detailed specifications for the server, including dimensions and power requirements.
Operating and shipping environmental parameters like temperature and humidity.
Specifications for different types of hard drives.
To Next Page