Need help?Do you have a question about the HP ProLiant ML330 Generation 3 and is the answer not in the manual?
General| Memory Slots | 6 DIMM slots |
|---|---|
| Form Factor | Tower |
| Storage | SCSI or SATA |
| Network | Embedded NC7781 Gigabit NIC |
| Operating System Support | Microsoft Windows Server, Red Hat Linux |
| Processor | Intel Xeon processor (up to 3.2 GHz) |
| Drive Bays | Up to 6 hot-plug or non-hot-plug drives |
Lists and illustrates physical parts of the server chassis and external components.
Lists and illustrates internal components like boards, processors, memory, and power supply.
Covers essential safety, ESD, rack, and server warnings for maintenance procedures.
Details the procedure for safely powering down the server before performing maintenance.
Procedure for removing and installing memory modules (DIMMs).
Steps to remove and replace the CPU and its cooling assembly.
Steps for removing and replacing the server's power supply unit.
Instructions for removing and replacing internal hard drives.
Utility for configuring RAID arrays on ATA models.
Utility for creating RAID arrays and logical drives before OS installation.
To Next Page
