HP ProLiant ML310 Generation 5 - Bezel and Access Panel Removal

Removal and replacement procedures 27
Unlock the bezel
Unlock and remove the bezel before accessing the hard drive cage and media bays. Unlock the bezel
before removing the access panel. Close and lock the bezel during normal server operations to ensure
proper cooling airflow.
Bezel
Unlock and remove the bezel before accessing the hard drive cage and media bays. Unlock the bezel
before removing the access panel. Close and lock the bezel during normal server operations to ensure
proper cooling airflow.
To remove the component:
1. Power down the server (on page 26).
2. Unlock the bezel.