94 Reference and Troubleshooting Guide
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the
first logical drive, assign RAID levels, and establish online spare configurations.
The utility provides support for the following functions:
•
•
•
Configuring one or more logical drives using physical drives on one or more
SCSI buses
Viewing the current logical drive configuration
Deleting a logical drive configuration
If you do not use the utility, ORCA will default to the standard configuration.
For more information about array controller configuration, refer to the controller
user guide, or the HP ROM-Based Setup Utility User Guide on the
Documentation CD or the HP website
(http://www.compaq.com/support/techpubs/whitepapers
).
HP ProLiant Essentials RDP
The HP ProLiant Essentials RDP software is the preferred method for rapid,
high-volume server deployments. The RDP software integrates two powerful
products: Altiris Deployment Solution and the HP ProLiant Integration Module.
The intuitive graphical user interface of the Altiris Deployment Solution
console's graphical interface provides simplified point-and-click and drag-and
drop operations that enable you to deploy target servers remotely, perform
imaging or scripting functions, and maintain software images.
For more information about the HP ProLiant Essentials RDP, refer to the HP
ProLiant Essentials Rapid Deployment Pack CD or refer to the HP website
(http://www.hp.com/servers/rdp
).
Re-Entering the Server Serial Number and Product ID
After you replace the system board, you must re-enter the server serial number
and the product ID.
To Next Page
Loading...
