Server Software and Configuration Utilities 95
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the System Options menu.
3. Select Serial Number. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
4. Press the Enter key to clear the warning.
5. Enter the serial number and press the Enter key.
6. Select Product ID.
7. Enter the product ID and press the Enter key.
8. Press the Escape key to close the menu.
9. Press the Escape key to exit RBSU.
10. Press the F10 key to confirm exiting RBSU. The server will automatically
reboot.
Management Tools
List of Tools:
Automatic Server Recovery..........................................................................................................96
ROMPaq Utility............................................................................................................................96
System Online ROM Flash Component Utility............................................................................96
Erase Utility..................................................................................................................................97
Management Agents.....................................................................................................................98
HP Systems Insight Manager .......................................................................................................98
Redundant ROM Support.............................................................................................................98
USB Support...............................................................................................................................100
To Next Page
Loading...
