HP ProLiant ML350 Generation 4p User Manual (English)

Other manuals for HP ProLiant ML350 Generation 4p

Questions and Answers:

J
Jonathan NicholsJul 28, 2025
Why HP ProLiant ML350 Generation 4p Server does not power on?
- R
  Ronald LynchJul 28, 2025
  If your HP Server isn't powering on, several factors could be at play. It might be due to an improperly seated or faulty power supply, so check and reseat it. A loose or faulty power cord could also be the culprit; ensure it's properly connected. Verify the power outlet is functional, as a power source problem could prevent the server from starting. Inspect the power switch and board for any issues in the power on circuit. Also, check that all components are properly seated. Lastly, a faulty internal component might be the reason; in that case, identify and replace the component.
J
Joseph ChandlerAug 4, 2025
What to do if HP ProLiant ML350 Generation 4p boots, but reports a fault event?
- E
  Erica AndersonAug 4, 2025
  If your HP Server boots but reports a fault event, consider these possibilities: An improperly seated or faulty internal or external component might be the cause, so check and reseat all components. It could also be due to an unsupported component being installed; remove and replace it with supported components. Inspect and address any redundancy issues. Finally, ensure adequate cooling and ventilation, as a system overtemperature condition can trigger such events.
N
Nicholas BuchananAug 11, 2025
What to do if HP Server does not complete POST?
- B
  Becky ByrdAug 11, 2025
  If your HP Server isn't completing POST, it could be due to a few reasons. An improperly seated or faulty internal component might be the issue, so try reseating or replacing the component. A faulty KVM device could also be the cause; test with a different KVM device. Lastly, the video device might be faulty, so consider replacing it.
J
James CarterAug 19, 2025
How to fix HP ProLiant ML350 Generation 4p Server that does not boot a previously installed operating system?
- S
  Shannon TaylorAug 20, 2025
  If your HP Server fails to boot a previously installed operating system, the issue might stem from a corrupted operating system, in which case you should repair or reinstall the OS. Alternatively, there might be a hard drive subsystem problem; check the hard drive connection and its functionality.

HP ProLiant ML350 Generation 4p Specifications

General

Processor Socket	Socket 604
Chipset	Intel E7520
Form Factor	Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Processor	Intel Xeon
Memory	PC2-3200 DDR2 SDRAM
Memory Slots	8
Storage	SAS or SATA (depending on configuration)
Drive Bays	Up to 8 hot-plug drive bays
Network	Embedded NC7782 PCI-X Gigabit Server Adapter
Power Supply	Redundant power supply optional
Expansion Slots	6 total: 2 PCI-Express, 2 PCI-X