To Next Page

To Previous Page

30 HP ProLiant ML350 Generation 4p Server Maintenance and Service Guide

CD-ROM drive

To remove the component:

1. Remove the access panel.

2. Disconnect the cables from the rear of the CD-ROM drive.

3. Push up on the release lever and push the drive partially out through the front

of the server.

4. Remove the CD-ROM drive.

Tape drive

To remove the component:

1. Remove the access panel.

2. Disconnect the data and power cables from the rear of the tape drive.

Other manuals for HP ProLiant ML350 Generation 4p

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant ML350 Generation 4p and is the answer not in the manual?

General

Processor Socket	Socket 604
Chipset	Intel E7520
Form Factor	Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Processor	Intel Xeon
Memory	PC2-3200 DDR2 SDRAM
Memory Slots	8
Storage	SAS or SATA (depending on configuration)
Drive Bays	Up to 8 hot-plug drive bays
Network	Embedded NC7782 PCI-X Gigabit Server Adapter
Power Supply	Redundant power supply optional
Expansion Slots	6 total: 2 PCI-Express, 2 PCI-X