Hardware options installation 85
11.
Connect the mini-SAS cables to the drive backplane option.
12. Connect the mini-SAS cables to the SAS controller option.
NOTE: For more information about connecting the cables to SAS controller option, see the
documentation that ships with SAS controller option kit.
13. Connect the power cable to the appropriate connector on the system board for your configuration.
14. Install the fan cage.
15. Install the air baffle.
16. For tower models, do the following:
a. Install the access panel (on page 23).
b. Return the server to an upright position.
17. For rack models, do the following:
a. Install the rack bezel (on page 22).
To Next Page
Loading...
